How to Fix Common Canon TS3722 Setup Problems?

If an earlier installation failed, follow Canon’s instructions to remove the unsuccessful installation before trying again. This can help prevent conflicts between old and new printer software.

4. Fix Canon TS3722 Printer Not Connecting to a Computer

Sometimes, the printer connects to Wi-Fi successfully but does not appear on a Windows computer or Mac.

First, confirm that both devices are connected to the same local network when using wireless printing. Then check whether the printer has been added to your operating system.

On Windows:

1. Open Settings.
2. Select Bluetooth & devices, then Printers & scanners.
3. Choose Add device.
4. Wait for Windows to detect the printer.
5. Follow the prompts to add it.

On Mac:

1. Open System Settings.
2. Select Printers & Scanners.
3. Choose Add Printer, Scanner, or Fax.
4. Select the Canon printer if it appears.
5. Follow the instructions to complete the process.

Menu names may differ depending on your operating system version. If the printer is not detected, check its Wi-Fi connection and install the compatible Canon software.

5. Troubleshoot the Canon TS3722 Setup App

Canon’s supported setup software can help you connect the printer to your wireless network and configure printing. However, the setup process may stop if the application cannot detect the printer or communicate with the network.

To resolve this issue:

• Make sure the printer is powered on and ready.
• Check that your computer or phone has a working internet connection.
• Allow the setup application to access the local network when prompted.
• Temporarily disconnect from a VPN if it interferes with local device discovery.
• Close and reopen the setup application.
• Download the latest compatible setup software from Canon’s official support website.

If you are performing the initial canon pixma printer setup, follow the instructions provided for the TS3722 model rather than using software intended for a different printer.

6. Fix Canon TS3722 Printer Offline Problems

Follow this procedure:

1. Turn off the printer using its power button.
2. Wait until the printer has shut down.
3. Restart your wireless router according to its instructions.
4. Wait until the router is fully operational.
5. Turn the printer back on.
6. Retry the wireless connection or print a test page.

A restart is generally a sensible early troubleshooting step. However, it will not correct an incorrect password, unsupported network configuration, or incompatible driver.

9. Reset Wireless Settings if Necessary

If you recently changed your router, Wi-Fi password, or network name, the printer may still be configured for the old network.

Use the wireless reset or network reconfiguration procedure specified in the Canon PIXMA TS3722 manual. The exact button sequence depends on the printer’s controls and the function you want to reset.

After clearing or changing the wireless settings, repeat the setup process and connect the printer to the current network.

A factory reset should be considered only when simpler troubleshooting steps have failed and the manufacturer’s instructions recommend it.

10. Test the Printer After Setup

Once you have resolved the problem, print a test document to confirm that the printer works correctly.

Check whether the printer can:

• Receive a print job from your computer or phone.
• Print without displaying an error.
• Maintain its wireless connection.
• Print with the expected paper size and quality.

If printing works but scanning does not, install or configure the compatible scanning software separately if required.

Frequently Asked Questions

Why is my Canon TS3722 setup not working?

Common causes include incorrect Wi-Fi credentials, incomplete initial setup, missing drivers, unsupported network settings, or software installation problems. Check each item before resetting the printer.

Can I complete Canon TS3722 Setup without a USB cable?

Yes. The printer supports wireless setup, allowing you to connect it to a compatible Wi-Fi network and print wirelessly. Follow the model-specific setup instructions.